Raised Bed Lumber Calculator

Pick your bed size and board size to get the number of rows, boards (cut from whatever length you buy), corner brackets, and screws.

Rows

3

Boards

10

Brackets

4

  • 2x6 x 8ft boards

    10 boards
  • Corner brackets

    4 pcs
  • Deck screws

    48 screws needed

    2 box of 25
Enter your local prices to see an estimated cost.

How we calculate this

Rows = bed height ÷ the board's actual (dressed) width — a 2x6 is really 5.5in, a 2x8 is 7.25in, and so on. Each row needs two length-cuts and two width-cuts; we figure out how many stock boards that takes by fitting those cuts onto boards of the length you buy (8, 10, or 12 ft), then multiply by the number of rows. Screws are 2 per board end at every corner (16 per row), corner brackets are 4 per bed, and boards get your waste margin on top.

Estimates only. Check local codes and product labels. Read our full disclaimer.

Popular Standard Sizes & Material Takeoffs

Instant material lists, bag counts, and buying guides pre-calculated for standard project dimensions:

FAQ

How many boards do I need for a 4×8 raised bed?

For a 4×8 ft bed two boards high in 2×6 lumber (11 in tall) with 8 ft stock, you need 7 boards including a 10% margin, plus 32 screws (2 boxes of 25).

How tall is a 2×6 actually?

Lumber is sold by nominal size. A 2×6 is actually 1.5 × 5.5 in, a 2×8 is 7.25 in wide, a 2×10 is 9.25 in and a 2×12 is 11.25 in. Two stacked 2×6 boards make an 11 in tall bed.

Which wood lasts longest for a raised bed?

Naturally rot-resistant woods such as cedar, redwood and cypress last longest untreated. Modern pressure-treated lumber (ACQ or copper azole) is also used for beds; untreated pine is cheapest but breaks down fastest in contact with soil.

Embed this calculator

Run a gardening blog or a landscaping business? Add this calculator to your own site for free. Paste the code below into any page; it stays up to date automatically.

Related guides

Related: Raised bed guides · Raised Bed Soil Calculator