4×4 ft Bed Material Takeoff

4×4 Raised Bed Lumber Calculator: Cut List & Board Count

A square 4×4-foot raised garden bed uses 2 standard 8-foot boards per course (each 8-foot board cut in half yields two 4-foot sides with zero waste). A two-tier 11-inch bed built with 2×6 lumber requires 4 eight-foot boards, 1 four-foot 4×4 post cut into four corner blocks, and 32 deck screws.

8-ft 2×6 Boards (2 Tiers)

4 boards

Cut into eight 4-ft sides

8-ft 2×10 Boards (1 Tier)

2 boards

Cut into four 4-ft sides

Corner Posts (4×4)

4 posts

Cut from one 4-ft or 8-ft 4×4

Exterior Screws

32 screws

3.5″ #10 coated screws

Customize or Adjust This 4×4 ft Bed Project

Pre-filled with standard 4×4 ft Bed measurements. Change depth or waste margins below to update quantities in real time.

Rows

2

Boards

5

Brackets

4

  • 2x6 x 8ft boards

    5 boards
  • Corner brackets

    4 pcs
  • Deck screws

    32 screws needed

    2 box of 25
Enter your local prices to see an estimated cost.

4×4 ft Bed Material Takeoff Breakdown

Lumber Size & TiersActual Height8-ft Boards NeededCut List
1 Tier of 2×87.25 inches2 boards (8 ft)Cut both in half -> four 4-ft sides
1 Tier of 2×109.25 inches2 boards (8 ft)Cut both in half -> four 4-ft sides
2 Tiers of 2×611.0 inches4 boards (8 ft)Cut all 4 in half -> eight 4-ft sides
3 Tiers of 2×616.5 inches6 boards (8 ft)Cut all 6 in half -> twelve 4-ft sides

Contractor & Builder Notes for 4×4 ft Bed

  • ✓Have the lumberyard make one cross-cut at 48 inches on each 8-foot board so the entire 4×4 bed fits in the trunk of a compact car.

Frequently Asked Questions: 4×4 ft Bed

How many 8-foot boards do I need to build a 4x4 raised bed?

You need 2 eight-foot boards per tier (cut in half into four 4-foot boards). That is 2 boards for a single-tier bed or 4 boards for a two-tier bed.