Shed Foundation Calculator
A 10×12 ft shed built on a 4-inch crushed gravel pad with a 1-foot overhang takes approximately 3.2 tons (2.3 cubic yards) of compacted stone and 7 eight-foot 4x4 timbers. Enter your shed size to get exact delivery volumes.
Gravel (tons)
3.2 t
Volume (yd³)
2.29 yd³
Pad size
12' × 14'
- 3.2 tons
Crushed stone (#57 or ¾-minus)
≈ 2.29 yd³ (61.6 ft³)
- 7 pieces
4x4 Ground contact timbers (8 ft)
52 linear ft perimeter
- 17 stakes
1/2" × 24" Steel rebar stakes
Anchors timbers into ground every 4 ft
- 193.2 sq ft
Heavy-duty woven geotextile
Subgrade separation fabric (+15% overlap)
Bagged and bulk options are alternatives — the total uses the cheapest one you price.
How we calculate this
The foundation pad length and width equal the shed dimensions plus twice your chosen border overhang (typically 12 inches on each side to catch roof drip lines and prevent muddy splashback). We calculate total volume as Pad Area × Depth, add a 10% compaction factor (vital for vibrating plate tampers), and convert cubic yards to tons using the standard 1.4 tons per cubic yard density for crushed #57 or ¾-minus stone.
Estimates only. Always confirm ground slope, setback zoning regulations, and utility lines before excavation. Read our full disclaimer.
Popular Standard Sizes & Material Takeoffs
Instant material lists, bag counts, and buying guides pre-calculated for standard project dimensions:
10×10 ft
A 10x10 shed needs a 12x12 gravel pad (12-inch overhang), requiring 1.96 cubic yards (2.74 tons) of crushed stone and 6 perimeter timbers.
10×12 ft
A 10x12 shed needs a 12x14 gravel pad (12-inch overhang), requiring 2.29 cubic yards (3.20 tons) of crushed stone and 7 perimeter timbers.
8×10 ft
An 8x10 shed foundation requires a 10x12 pad with 1.63 cubic yards (2.28 tons) of gravel and 6 perimeter timbers.
10×16 ft
A 10x16 shed foundation requires a 12x18 pad (216 sq ft) with 2.93 cubic yards (4.11 tons) of gravel and 8 perimeter timbers.
12×16 ft
A 12x16 shed foundation pad (14x18 ft) requires 3.42 cubic yards (4.79 tons) of crushed gravel and 8 perimeter timbers.
8×8 ft
An 8x8 shed needs a 10x10 gravel pad (100 sq ft) with 1.36 cubic yards (1.91 tons) of crushed gravel and 5 perimeter timbers.
Gravel & timbers for standard shed sizes
| Shed size | Pad size | Gravel (yd³) | Gravel (tons) | 4x4 Timbers (8 ft) |
|---|---|---|---|---|
| 8×10 ft | 10×12 ft | 1.63 | 2.28 | 6 |
| 10×10 ft | 12×12 ft | 1.96 | 2.74 | 6 |
| 10×12 ft | 12×14 ft | 2.29 | 3.20 | 7 |
| 12×16 ft | 14×18 ft | 3.42 | 4.79 | 8 |
| 12×20 ft | 14×22 ft | 4.18 | 5.85 | 9 |
FAQ
How deep should a gravel shed foundation be?
4 to 6 inches of compacted crushed stone (such as 3/4-minus or #57 clean stone) is the standard depth for backyard garden and storage sheds. Compact in 2-inch layers using a vibrating plate compactor.
Why should a shed foundation pad be 1 foot wider than the shed?
Extending the gravel pad 12 inches beyond all four walls catches roof rainwater runoff, prevents muddy splashback against siding, and stops frost from undermining the timber perimeter.
What gravel is best under a shed?
Crushed stone with rock dust (3/4-minus, crusher run, or quarry process) locks tightly together when tamped, creating a rock-solid level surface. Clean #57 crushed stone also works excellently where maximum drainage is required.
Do I need landscape fabric under the gravel?
Yes. Always lay a heavy-duty woven geotextile fabric directly over the bare excavated soil before pouring gravel. It permanently prevents crushed stone from sinking into clay and stops weeds.
Embed this calculator
Run a gardening blog or a landscaping business? Add this calculator to your own site for free. Paste the code below into any page; it stays up to date automatically.
Related guides
Related: Garden structure guides · Concrete Slab Calculator · Gravel Calculator

