Cinder Block Raised Bed Calculator
Calculate standard 8×8×16-inch concrete cinder blocks (CMU) for 1, 2, or 3 stacked courses, along with exact soil volume for both the center planting bed and the hollow perimeter block holes.
8×8×16 Blocks
36 blocks
Total Soil Volume
36.4 ft³
2 ft³ Soil Bags
19 bags
- 36 blocks
Standard 8×8×16 CMU Cinder Blocks
32 exact + 10% spare
- 1.35 yd³
Bulk Raised Bed Soil (Bed + Cores)
36.4 ft³ total w/ 10% settling
- 19 bags
Raised Bed Soil (2.0 ft³ bags)
Fills interior bed & block holes
- 2 tubes
Masonry Construction Adhesive (10 oz)
Locks upper block courses
- 8 pins
1/2" × 24" Rebar Anchor Pins
Driven through block cores into subgrade
Bagged and bulk options are alternatives — the total uses the cheapest one you price.
How we calculate cinder blocks & core-fill soil
Standard concrete masonry units (CMUs) have nominal dimensions of 16" long × 8" wide × 8" high. When laying a rectangular perimeter, the two long walls span the full exterior length, while the two short end walls sit inside the 8-inch corner returns (subtracting 16 inches so corner blocks are never double-counted).
Because the 8-inch thick walls reduce interior width and length by 16 inches (`1.33 ft`), we compute the true interior growing area separately from the hollow vertical cells inside the blocks (~0.32 cubic feet per two-core block), giving you an exact combined bag and bulk cubic-yard soil takeoff.
Estimates only. Nominal 8×8×16 blocks measure 7-5/8" × 7-5/8" × 15-5/8" actual size. Read our full disclaimer.
Popular Standard Sizes & Material Takeoffs
Instant material lists, bag counts, and buying guides pre-calculated for standard project dimensions:
4×8 ft Bed
A 4x8 cinder block raised bed takes 16 standard 8x8x16 blocks for 1 tier (8 in high) or 32 blocks for 2 tiers (16 in high), plus soil for bed and holes.
4×4 ft Bed
A 4x4 cinder block raised bed uses 10 standard 8x8x16 blocks for 1 course (8 in) or 20 blocks for 2 courses (16 in), plus 17 cu ft of soil.
8×8×16 cinder blocks & soil needed for standard raised beds
| Exterior bed size | Height (courses) | 8×8×16 blocks (+10%) | Interior soil | Block core fill | 2 cu ft soil bags |
|---|---|---|---|---|---|
| 4×4 ft | 8 in (1 course) | 11 (10 exact) | 5.3 ft³ | 3.2 ft³ | 5 bags |
| 8×4 ft | 8 in (1 course) | 18 (16 exact) | 13.1 ft³ | 5.2 ft³ | 10 bags |
| 8×4 ft | 16 in (2 courses) | 36 (32 exact) | 26.1 ft³ | 10.3 ft³ | 19 bags |
| 12×4 ft | 16 in (2 courses) | 49 (44 exact) | 41.8 ft³ | 14.1 ft³ | 28 bags |
FAQ
How many cinder blocks do I need for a 4x8 raised garden bed?
A single-tier (8-inch tall) 4×8 raised bed uses 16 standard 8×8×16-inch cinder blocks (6 along each 8-foot side and 2 between the corners on each 4-foot end). A two-tier (16-inch tall) 4×8 bed takes 32 blocks (buy 36 to cover breakage).
How much soil does it take to fill the holes in cinder blocks?
Each standard 8×8×16 two-core cinder block holds approximately 0.32 cubic feet (about 2.4 gallons) of soil inside its two hollow cells. For a 16-block single-tier bed, filling the perimeter holes requires an extra 5.1 cubic feet (3 bags of 2 cu ft soil).
Are concrete cinder blocks safe for growing vegetables?
Yes. Modern concrete masonry units (CMUs) purchased new at lumberyards are made from Portland cement, sand, and gravel aggregate (not coal fly-ash cinders). Note that concrete slightly raises soil pH right next to the wall, making the outer block holes ideal for Mediterranean herbs, marigolds, and nasturtiums.
Embed this calculator
Run a gardening blog or a landscaping business? Add this calculator to your own site for free. Paste the code below into any page; it stays up to date automatically.
Related guides
Related: Raised Bed Soil Calculator · Raised Bed Lumber Calculator · Retaining Wall Calculator


