1 Ton of Gravel Material Takeoff

How Much Area Does 1 Ton of Gravel Cover?

One ton of crushed stone or gravel (approx 2,000 lbs or 0.71 cubic yards) covers roughly 100 square feet at 2 inches deep, 70 square feet at 3 inches, or 50 square feet at 4 inches.

Coverage at 2"

100 sq ft

Standard path surface

Coverage at 3"

70 sq ft

Heavy driveway top coat

Cubic Yards

0.71 yd³

At 1.4 tons/yd³ density

0.5 cu ft Bags

39 bags

Retail bag equivalent

Customize or Adjust This 1 Ton of Gravel Project

Pre-filled with standard 1 Ton of Gravel measurements. Change depth or waste margins below to update quantities in real time.

Area

100 ft²

Volume

1.24 yd³

Weight

1.73 tons

  • Bulk gravel

    ≈ 1.73 tons

    1.24 yd³
  • Bagged gravel

    67 bags (0.5 ft³)
Enter your local prices to see an estimated cost.

Bagged and bulk options are alternatives — the total uses the cheapest one you price.

1 Ton of Gravel Material Takeoff Breakdown

Layer DepthSquare Feet Covered by 1 TonCubic Yards0.5 cu ft Bags
2 inches (pathway)100 sq ft0.71 yd³39 bags
3 inches (driveway top)70 sq ft0.71 yd³39 bags
4 inches (base layer)50 sq ft0.71 yd³39 bags
6 inches (shed / slab base)35 sq ft0.71 yd³39 bags

Contractor & Builder Notes for 1 Ton of Gravel

  • ✓Crushed stone (#57 or road base) weighs between 1.35 and 1.5 tons per cubic yard depending on moisture. 1.4 tons is the standard quarry baseline.

Frequently Asked Questions: 1 Ton of Gravel

How many cubic yards in a ton of gravel?

At a standard density of 2,800 lbs per cubic yard (1.4 tons/yd³), 1 ton equals approximately 0.71 cubic yards (or 19.3 cubic feet).

How many 50 lb bags of gravel make a ton?

It takes exactly 40 fifty-pound bags (or 39 half-cubic-foot bags) to equal one short ton (2,000 lbs).