50 Linear Feet Material Takeoff

50-Foot Landscape Edging Calculator: Strips, Rolls & Stakes

Edging a 50-linear-foot flower bed or walkway border (such as a 15×10-foot rectangular bed perimeter) requires 55 linear feet of material with a 10% overlap and miter-cut buffer—which equals 14 four-foot edging strips, 7 eight-foot steel strips, or three 20-foot poly coils, anchored by 26 landscape spikes spaced every 2 feet.

Total Length (+10%)

55 linear ft

50 ft exact + 10% overlap

4-ft Edging Strips

14 pieces

Steel / aluminum sections

8-ft Steel Strips

7 pieces

Commercial steel edging

Anchoring Stakes

26 stakes

10″ spikes every 24 inches

Customize or Adjust This 50 Linear Feet Project

Pre-filled with standard 50 Linear Feet measurements. Change depth or waste margins below to update quantities in real time.

Perimeter

50 ft

Edging pieces

14

Stakes

25

  • Edging (4ft pieces)

    14 pieces
  • Edging stakes

    25 pcs
Enter your local prices to see an estimated cost.

50 Linear Feet Material Takeoff Breakdown

Edging FormatPiece / Roll LengthPieces Needed (+10%)Anchoring Stakes (2-ft Spacing)
4-ft Steel / Aluminum Strips4 feet14 strips26 stakes (3–4 per strip)
8-ft Commercial Steel Strips8 feet7 strips26 stakes (4 per strip)
20-ft No-Dig Poly Coils20 feet3 coils (60 ft)26 spiral nylon spikes
60-ft Contractor Poly Roll60 feet1 roll26 spiral nylon spikes

Contractor & Builder Notes for 50 Linear Feet

  • ✓Drive anchoring spikes at a slight 15-degree angle through the edging wall and space them every 18 to 24 inches in freeze-thaw climates so winter frost cannot push plastic or steel edging out of the soil.

Frequently Asked Questions: 50 Linear Feet

How many landscape stakes do I need for 50 feet of edging?

At the standard 2-foot stake spacing, 50 feet of edging requires 26 stakes (25 intervals plus 1 end stake). In heavy clay or frost-heave zones, space stakes every 18 inches (35 stakes).