Grass Seed & Overseeding Calculator

A 1,000 sq ft lawn needs about 4.4 lbs of Tall Fescue seed for overseeding (or 8.8 lbs for bare soil) — enter your yard's length and width, select your grass species, and get exact poundage, retail bag counts, and starter fertilizer quantities.

Lawn Area

1,000 ft²

Seed Needed

4.4 lbs

Germination

7–14 days

Spreader Tip: Divide your seed in half and broadcast in two perpendicular passes (North–South, then East–West) at 4 lbs per 1,000 ft² to eliminate bare stripes.
  • Tall Fescue (Turf-Type) Seed (3 lb bag)

    Small patch retail bag

    2 bags
  • Tall Fescue (Turf-Type) Seed (7 lb bag)

    Standard home center bag

    1 bags
  • Tall Fescue (Turf-Type) Seed (20 lb bag)

    Best value for ≥ 2,500 ft²

    1 bags
  • Starter Lawn Fertilizer

    ~4 lbs per 1,000 ft²

    4 lbs
Enter your local prices to see an estimated cost.

Bagged and bulk options are alternatives — the total uses the cheapest one you price.

How we calculate grass seed rates

We compute lawn area as Length (ft) × Width (ft), divide by 1,000, and multiply by the National Turfgrass Evaluation Program (NTEP) and university extension seeding rate for your selected species. Overseeding an existing thin lawn requires roughly 50% of the seed rate used for establishing a brand-new lawn on bare ground.

Large-seeded cool-season grasses like Tall Fescue and Perennial Ryegrass have fewer seeds per pound (~220,000 seeds/lb) and require 6–8 lbs per 1,000 sq ft on bare soil, whereas tiny-seeded Kentucky Bluegrass (~2.1 million seeds/lb) and Bermudagrass require only 2–3 lbs per 1,000 sq ft.

Estimates only. Check your seed bag's specific purity and germination label. Read our full disclaimer.

Popular Standard Sizes & Material Takeoffs

Instant material lists, bag counts, and buying guides pre-calculated for standard project dimensions:

Grass seeding rates per 1,000 square feet

Standard university extension rates (lbs per 1,000 sq ft) for new bare-soil lawns vs overseeding existing turf.
Grass TypeNew Lawn (per 1,000 sq ft)Overseeding (per 1,000 sq ft)Germination Time
Tall Fescue (Turf-Type)8 lbs4 lbs7–14 days
Kentucky Bluegrass3 lbs1.5 lbs14–28 days
Perennial Ryegrass8 lbs4 lbs5–10 days
Sun & Shade Mix (Cool-Season)6 lbs3 lbs7–21 days
Bermudagrass (Warm-Season)2 lbs1 lbs10–21 days
Zoysiagrass (Warm-Season)2.5 lbs1.25 lbs14–21 days

FAQ

How much grass seed do I need per 1,000 square feet?

Seeding rates depend on seed size: large-seeded cool-season grasses like Tall Fescue and Perennial Ryegrass require 6 to 8 lbs per 1,000 sq ft for a new lawn (3 to 4 lbs for overseeding). Tiny-seeded grasses like Kentucky Bluegrass and Bermudagrass require only 2 to 3 lbs per 1,000 sq ft for new lawns (1 to 1.5 lbs for overseeding).

When is the best time to overseed a lawn?

For cool-season grasses (Tall Fescue, Bluegrass, Ryegrass), late summer to early autumn (45 days before your first fall frost) is best because soil is still warm (60°F–70°F) while air temperatures are cool and weed pressure is low. For warm-season grasses (Bermuda, Zoysia), late spring to early summer when soil temperatures reach 65°F–70°F is optimal.

What happens if I put down too much grass seed?

Applying more than double the recommended rate causes overcrowding: thousands of seedlings compete for the same light, water, and nutrients, resulting in weak, spindly grass blades and high susceptibility to damping-off fungal diseases (Pythium).

Embed this calculator

Run a gardening blog or a landscaping business? Add this calculator to your own site for free. Paste the code below into any page; it stays up to date automatically.

Related guides

Related: Topsoil & Fill Dirt Calculator · Mulch Calculator · Drip Irrigation Calculator · Soil & mulch guides