50-Foot Trench Material Takeoff

How Much Gravel Do I Need for a 50-Foot French Drain?

A standard 50-foot residential French drain dug 12 inches wide and 18 inches deep requires 3.06 cubic yards (approx 4.28 tons) of washed #57 drainage gravel, 55 linear feet of 4-inch perforated drain pipe, and 275 square feet of non-woven geotextile fabric (including 10% overlap).

Drainage Gravel

3.06 yd³

~4.3 tons of clean #57 stone

Perforated Pipe

55 ft

Six 10-ft sticks of 4″ PVC

Filter Fabric

275 sq ft

Non-woven geotextile wrap

Trench Volume

75 cu ft

50′ × 1′ × 1.5′ excavation

Customize or Adjust This 50-Foot Trench Project

Pre-filled with standard 50-Foot Trench measurements. Change depth or waste margins below to update quantities in real time.

Gravel

3.06 yd³

Fabric

275 ft²

Pipe

55 ft

  • Drainage gravel

    3.06 yd³
  • Landscape fabric

    275 ft²
  • Perforated drain pipe

    55 ft
Enter your local prices to see an estimated cost.

50-Foot Trench Material Takeoff Breakdown

Trench Depth (12″ Wide)Excavated VolumeGravel (Cubic Yards)Estimated TonsFilter Fabric Area
12 inches (Shallow Yard)50 cu ft2.04 yd³2.86 tons220 sq ft
18 inches (Standard)75 cu ft3.06 yd³4.28 tons275 sq ft
24 inches (Deep Perimeter)100 cu ft4.07 yd³5.70 tons330 sq ft

Contractor & Builder Notes for 50-Foot Trench

  • ✓Always use washed, clean #57 crushed stone or 3/4–1.5 inch river rock with zero dust fines. Never use crusher run or pea gravel in a French drain.
  • ✓Slope the trench at least 1% (1.2 inches of drop per 10 feet of run, or 6 inches total drop over 50 feet) so water flows by gravity to the daylight outlet.

Frequently Asked Questions: 50-Foot Trench

How many tons of gravel for a 50 ft french drain?

For a 12-inch wide by 18-inch deep trench, you need 3.06 cubic yards, which weighs approximately 4.3 tons of #57 stone.