100 Sq Ft Garden Material Takeoff

100 Sq Ft Garden Drip Irrigation Calculator: Tubing & Emitters

A 100-square-foot vegetable garden (such as a 20×5-foot plot or three 4×8 beds) spaced at 1.5-foot row intervals requires 4 lateral rows (88 feet of inline drip tubing with 10% buffer), 80 emitters at 12-inch spacing, and 27 galvanized hold-down staples.

Drip Tubing (+10%)

88 linear ft

One 100-ft roll covers it

Inline Emitters (12″)

80 emitters

40 GPH total flow @ 0.5 GPH

Header Fittings

4 tees + 4 ends

1/2″ barbed connectors

Tubing Staples

27 stakes

Spaced every 3 feet

Customize or Adjust This 100 Sq Ft Garden Project

Pre-filled with standard 100 Sq Ft Garden measurements. Change depth or waste margins below to update quantities in real time.

Drip lines

4

Tubing

88 ft

Emitters

84

  • Drip line tubing

    88 ft
  • Mainline tubing

    17 ft
  • Drip emitters

    84 pcs
  • Tee connectors

    4 pcs
  • End caps

    4 pcs
Enter your local prices to see an estimated cost.

100 Sq Ft Garden Material Takeoff Breakdown

Row SpacingLateral Rows (20 ft)Total Drip Tubing (+10%)Emitters (12″ Spacing)Total Flow (0.5 GPH)
12 inches (5 rows)5 rows110 ft100 emitters50 GPH
18 inches (4 rows)4 rows88 ft80 emitters40 GPH
24 inches (3 rows)3 rows66 ft60 emitters30 GPH

Contractor & Builder Notes for 100 Sq Ft Garden

  • ✓A single 1/2-inch poly mainline safely carries up to 200 gallons per hour (GPH)—more than enough to run four 100-square-foot garden beds simultaneously on one timer zone.

Frequently Asked Questions: 100 Sq Ft Garden

Is one 100-foot roll of drip emitter tubing enough for a 100 sq ft garden?

Yes. At 18-inch row spacing, a 100 sq ft bed uses 80 feet exact (88 feet with 10% cut slack), leaving 12 feet to spare from a 100-foot coil.