6×6 Structural Post Material Takeoff

6×6 Post Concrete Calculator: Pergola, Deck & Gate Footings

A nominal 6×6 post (actual 5.5×5.5 inches) requires at least a 12-to-16-inch diameter hole. At 12 inches wide and 36 inches deep, each hole takes 1.73 cubic feet of concrete after subtracting the submerged 6×6 post—or 10.5 cubic feet (20 bags of 80-pound concrete with 10% buffer) for a 6-post pergola or deck.

1 Post (12″ × 36″)

1.73 cu ft

Net around 5.5″ post

80-lb Bags (1 Post)

4 bags

3.2 bags w/ 10% waste

4 Posts (Pergola)

13 bags

80-lb concrete mix

6 Posts (Deck / Arbor)

20 bags

80-lb concrete mix

Customize or Adjust This 6×6 Structural Post Project

Pre-filled with standard 6×6 Structural Post measurements. Change depth or waste margins below to update quantities in real time.

Volume per hole

1.73 ft³

Total volume

11.4 ft³

Bags

19

  • Concrete mix

    19 bags
Enter your local prices to see an estimated cost.

6×6 Structural Post Material Takeoff Breakdown

Hole Size (Dia × Depth)ApplicationNet Concrete / Hole60-lb Bags / Post80-lb Bags / Post
12″ × 30″Heavy gate / privacy fence1.44 cu ft3.5 bags (buy 4)2.7 bags (buy 3)
12″ × 36″4-post patio pergola1.73 cu ft4.2 bags (buy 5)3.2 bags (buy 4)
16″ × 36″Deck pier (sonotube, post on top)4.19 cu ft10.3 bags (buy 11)7.7 bags (buy 8)
18″ × 42″Northern frost-line deck pier6.19 cu ft15.1 bags (buy 16)11.4 bags (buy 12)

Contractor & Builder Notes for 6×6 Structural Post

  • ✓For structural decks and pergolas, IRC building code recommends pouring a full cylindrical concrete pier up to grade and anchoring the 6×6 post on top with a galvanized standoff base rather than burying the wood in wet concrete.

Frequently Asked Questions: 6×6 Structural Post

How wide should a hole be for a 6x6 post?

Follow the 3× post-width rule: a nominal 6×6 post (5.5 inches actual) should sit in a 12-inch minimum (16-inch ideal) diameter hole.